DHD RM2200D

This connection type implements the remote control protocol for the DHD RM2200D.

Supported Devices and Prerequisites

This protocol supports the DHD RM2200D. Communication is through TCP, so the DSP core must be connected with the network.

Configuration

On the General tab, enter the IP address and the TCP port for the remote control protocol (usually 2200).

Parameters

This connection type provides the following parameters:

Main Control Unit

• main/button/<button> (boolean, read-only) - the press state of the respective button on the main control unit
• main/lcd/1 and main/lcd/2 (string, read-only) - the texts currently displayed in the two-line LCD of the main control unit

Faders

Fader numbers are 1 through 16.

• fader/<number>/source (integer, read/write) - the ID of the audio source currently assigned to this fader
• fader/<number>/on (boolean, read/write) - the status of the fader ON function
• fader/<number>/cue (boolean, read/write) - the status of the fader CUE function
• fader/<number>/button/<button> (boolean, read-only) - the press state of the respective button on this fader strip
• fader/<number>/led/<led> (boolean, read-only) - the state of the respective LED on this fader strip
• fader/<number>/status/<status> (boolean, read-only) - the inputstate, timer, faderstart and loadsetup state of this fader strip